Purelux Beacon panel
€45.00
Specifications
- Product: Purelux Flash Panel Controller Gen2
- Intended use: Remote control of Flash Panel Gen2 warning lights
- Operating voltage: 10-36V
- Maximum current: 20A
- Connector: Straight wires, no connector
- Power cord length: 250 cm
- Connection cable length: 50 cm
- Dimensions: 120 x 60 x 10 mm (Length x Width x Depth)
- IP rating: IP69K
- Approvals: EMC: ECE R10, R65 Class 2, CISPR25 Class 5
- NOTE: Intended for use with Purelux Flash Gen2 lights only
- Warranty: 24 months
Quick guide
Coupling
Connect both the power cable of the switch panel and the cable going to the light separately. Connect all the same colored cables together from the switch and warning panel. Connect the red cable of the switch panel to power and the black cable to ground. Synchronize the switch panel and the warning light to flash at the same time by connecting the yellow cable of the switch panel and each light to be synchronized. Once the cables are connected, press the MODE switch all the way down for about 10 seconds, after which the warning light and the switch panel will flash at the same time.
- Red: Power (+)
- Black: Ground (-)
- Yellow: Warning light functions + synchronization
- Blue: Warning light #1 (R65) / Night mode
- White: Even light
- Green: Traffic control left/right (connects to the brown wire on the beacon panel)
You can find the manufacturer’s connection instructions by clicking here (opens in a new window).
