Purelux Flash 1400 Gen2 – Panel / 12/24V / 150W / 1400 mm

Specifications

• Brand and model: Purelux Flash 1400 Gen2
• Intended use: As a warning and safety light in cars / work machines, etc.
• Operating voltage: 10-36V
• Manufacturer’s stated current consumption: 12.45A @ 12V / 5.5A @ 24V
• Manufacturer’s declared power: 150 W
• Mounting: Mounting foot set, mounting bolts
• Connector: No connector, straight wires
• Cable length: 500 cm
• Dimensions: 1384 x 35 x 240 mm (Width/Height/Depth)
  • Height with skids: 77 mm
• Weight (with legs): 8600 g
• IP rating: IP69K
• Approvals: EMC: ECE R10, R65 Class 2, CISPR25 Class 5, CE, RoHS
• Operating temperature: -40°C – +50°C
• Warranty: 24 months
• Other: 12 different operating modes, orange light, Ultra low profile, 360° illumination
• Importer: Handshake.fi

Operating modes

• Single flash (R65 Class 2 )
• Fast double flash (R65 Class 2)
• Slow double flash
• Multi-flash
• Combo single/double flash output
• Combo single/multiple flash
• Breathe
• Left arrow
• Right arrow
• Arrow from the center
• Cruise (connected with a separate wire, check quick guide)
• R65 Night mode (connected with a separate wire, check quick guide)

Quick guide

Coupling

• Red: Power (+)
• Black: Ground (-)
• Yellow: Warning light functions and synchronization
• Blue: Warning light #1 (R65 Night Mode)
• White: Cruise light
• Brown: Traffic control, left/right

Hazard light functions: Touch the red wire with the yellow wire for less than 1 second to switch the flashing functions.

Synchronization: Connect the yellow wire of each luminaire to be synchronized.

Flashing function #1 (R65): Touch the red wire with the blue wire for less than 1 second.

Night mode: Touch the red wire with the blue wire for 5 seconds. The light brightness will decrease by 50% in all flashing modes (does not apply to steady light). To disable night mode, disconnect the wire.

Steady light: Connect the white wire to the red wire. To disable steady light, disconnect the wire. The warning panel will return to the last flashing function used.

Traffic control: Touch the red wire with the brown wire for 1 second. The light activates the left turn signal. Touch the red wire with the brown wire for 5 seconds to activate the right turn signal.